The machine uses the vibration motor as the excitation source to make the working cylinder produce three-dimensional vibration. Eccentric weights are installed at the top and bottom of the vibration motor. When the vibration motor rotates at high speed, the exciting force generated by the two eccentric blocks changes along the circumferential direction in the horizontal plane, causing the body to produce circular motion in the horizontal plane. At the same time, because the exciting force does not pass through the center of mass of the body. Therefore, the inclined excitation torque is generated, which makes the cylinder swing around the horizontal axis. Because the bottom of the cylinder is in a circular shape, the amplitude of each point is inconsistent. The formed grinding block and workpiece in the cylinder not only revolve vertically along the central axis, but also roll around the center of the ring, and their synthetic motion is annular spiral motion. At the same time, the cylinder is spirally raised, and the formed grinding block and workpiece slide upward along the spiral. The friction force between the workpiece and the formed grinding block is increased and the finishing efficiency is improved. The inner wall of the cylinder is lined with wear-resistant rubber or polyurethane in order to reduce the wear of grinding blocks and workpieces and reduce noise. In order to reduce noise, a silencing cover can also be added.

characteristic:

1. The vibration deviation generated by the inertial vibration exciter (vibration motor) is used to make the machine move in the three-dimensional plane, so that the workpiece and abrasive run in one direction and rub each other, so as to achieve the effect of surface treatment.

2. It is suitable for finishing and finishing of large quantities of medium, small and size parts, with good processing effect and long time consumption. (good deburring effect)

3. The machining process does not damage the original size and shape of parts, and is suitable for workpieces that are afraid of collision.

4. It is easy to operate. During the working process, you can spot check the processing of parts at any time. Equipped with PLC control box, you can realize unmanned operation.

5. The vessel lining is made of PU material (polyurethane).

6. Equipped with discharging device, the abrasive is separated through the equipped screening equipment by using the positive and negative operation of the motor, and the workpiece is discharged automatically.

Specifications:

Model capacity (L) weight (kg) horsepower (HP) power (kw) machine size (mm) filling volume (L)

VB-25 25L 58KG 0.5HP 0.37KW ￠570 × 670H 100

VB-50 50L 260KG 1HP 0.75KW ￠696 × 850H 150

VB-100 100L 360KG 2HP 1.5KW ￠906 × 990H 300

VB-150 150L 460KG 3HP 2.25KW ￠1045 × 1035H 380

VB-250 250L 640KG 5HP 3.75KW ￠1200 × 1260H 650

VB-350 350L 750KG 7.5HP 5.62KW ￠1340 × 1330H 950

VB-500 500L 1070KG 10HP 7.2KW ￠1560 × 1560H 1200

VB-700 700L 1660KG 12HP 9.0KW ￠1730 × 1730H 2000

VB-1000 1000L 2000KG 15HP 11KW ￠1850*H2000 2500